Home ยป Porter Case
 |
|
Welcome to the Porter Case Store!
|
Porter Case Products
|
|
|
|
The same insert found in the PC II AVCS case
A generic interior that allows your case to adapt to a variety of equipment
It comes with a 1/2" sheet of HD foam for the bottom, a large outer cloth covered padded ring with Velcro on the outside to grab the case walls and 2 partial rows of Velcro inside that allow you to adjust the semi-rigid divider as needed, plus a sheet of convoluted foam for the lid
| MSRP: |
$74.50 |
Our Price: |
$74.50 |
|
|
|
This kit consists of four layers of gray foam 1.25" thick cut to fit the bottom of the case with a sheet of convoluted gray foam for the lid
A generic kit for most any application
Simply lay what you want to protect on the foam layers, use a marking pen for an outline, and then with an electric carving knife, craft knife or scissors, cut out the shapes
Just be sure to leave enough material in the remaining walls of the foam to be protective of all items as the bounce around
| MSRP: |
$97.50 |
Our Price: |
$97.50 |
|
|
|
|
|
|
The same insert as found in the Photocase
Convoluted gray foam for the lid, 1/2 inch high density foam sheet for the bottom
A cloth covered high density foam outer ring 4.5 inches tall with a Velcro strip on the outside to grab the case walls, one large divider, four medium dividers and ten small dividers
All of the above are with Velcro and are adjustable
| MSRP: |
$93.50 |
Our Price: |
$93.50 |
|
|
|
|
|
|
Designed to fit inside the larger PC II Porter Case II wheeled carryon, or it can be attached to the outside with the Hook/Accessory Strap
A padded shoulder strap is included
The Soft Computer Bag is the ideal solution for those times when you don't want to roll your Porter Case
Use the hard-side Porter Case to help transport and protect your soft case. Then, when you get to your destination it is ready to pull out of your Porter Case and slip over your shoulder
You arrive refreshed and ready for that important meeting
| MSRP: |
$39.95 |
Our Price: |
$39.95 |
|
|
|
Porter Case Computer Sleeves are sewn with a black outer covering of 1400 denier nylon, a skin diver wet suit style neoprene protective interior, and a 2" webbed end security strap with a logo and adjustable Velcro
This light weight sleeve offers added protection insurance for those times when you need to throw your notebook into your brief case or suitcase
It comes in three sizes to fit a variety of equipment needs
| MSRP: |
$29.95 |
Our Price: |
$29.95 |
|
|
|
Porter Case Computer Sleeves are sewn with a black outer covering of 1400 denier nylon, a skin diver wet suit style neoprene protective interior, and a 2" webbed end security strap with a logo and adjustable Velcro
This light weight sleeve offers added protection insurance for those times when you need to throw your notebook into your brief case or suitcase
It comes in three sizes to fit a variety of equipment needs
| MSRP: |
$34.95 |
Our Price: |
$34.95 |
|
|
|
Porter Case Computer Sleeves are sewn with a black outer covering of 1400 denier nylon, a skin diver wet suit style neoprene protective interior, and a 2" webbed end security strap with a logo and adjustable Velcro
This light weight sleeve offers added protection insurance for those times when you need to throw your notebook into your brief case or suitcase
It comes in three sizes to fit a variety of equipment needs
| MSRP: |
$39.95 |
Our Price: |
$39.95 |
|
|
|
The same style insert found in the Elite AV/Computer case or in the lower half of the PC II CMCS
A generic cloth covered padded ring that allows your case to adapt to your notebook or other equipment
The cloth covered padded ring has Velcro on the outside to grab the case plus several blocks of medium density gray foam to help give a snug fit to your equipment
| MSRP: |
$41.50 |
Our Price: |
$41.50 |
|
|
|
|
|
|
Airline Regulation carry-on size
Weighs approximately 13 lbs. (5kg.)
4" ball bearing wheels
Solid 3/8" solid steel axle
42" padded telescope handle
Secondary reinforced side strap handle
Exterior tie down strap
Carries up to 200 pounds (90 kg)
Combination Lock
Customizable
| MSRP: |
$437.00 |
Our Price: |
$349.00 |
|
|
|
Airline carry-on size
ABS hard-side construction
4" ball bearing wheels with soft tread
Solid 3/8" solid steel axle
43" padded telescope handle
Secondary reinforced side strap handle
Exterior tie down strap
Carries up to 200 pounds (90 kg) on top
Combination Lock
Customizable
| MSRP: |
$416.00 |
Our Price: |
$333.00 |
|
|
|
Designed as a rolling digital projector/notebook computer carry on case
1600 denier walls with six inline skate wheels (3per side) spaced 14.5" wide, a 41" extension handle, padded shoulder strap, #10 zippers, with a soft feel top carrying handle
Front of case has a Velcro flap and large zippered expansion pouch plus smaller remote size pouch
The second zippered area is for a notebook computer and holds a separate padded case with shoulder strap for side trips
The third zippered area has rigid padded walls and holds a digital projector with adjustable inserts
Total Case Interior Dims:12.5" H x 7.5" D x 14.5" L
Total Case Exterior Dims:14" H x 8" D x 16" L
Rear Interior Area Dims:11.5" H x 4" D x 14.5" L
Total Case External Dims with wheel assembly:17" H x 9.5" D x 16" L
| MSRP: |
$226.00 |
Our Price: |
$181.00 |
|
|
|
Designed as a rolling photography equipment carry on case
It has semi-rigid, padded 1600 denier walls with six inline skate wheels (3per side) spaced 14.5" wide, a 41" extension handle, padded shoulder strap, #10 zippers, with a soft feel top carrying handle
Front of case has a Velcro flap and large zippered expansion pouch plus smaller remote size pouch
The second zippered area is for a notebook computer and holds a separate padded case with shoulder strap for side trips
The third zippered area has rigid padded walls and holds a digital projector with adjustable inserts
Total Case Interior Dims:12.5" H x 7.5" D x 14.5" L
Total Case Exterior Dims:14" H x 8" D x 16" L
Rear Interior Area Dims:11.5" H x 4" D x 14.5" L
Total Case External Dims with wheel assembly:17" H x 9.5" D x 16" L
| MSRP: |
$226.00 |
Our Price: |
$181.00 |
|
|
|
Designed as a rolling mobile office carry on case
It has semi-rigid, padded 1600 denier walls with six inline skate wheels (3per side) spaced 14.5" wide, a 41" extension handle, padded shoulder strap, #10 zippers, with a soft feel top carrying handle
Front of case has a Velcro flap and large zippered expansion pouch plus smaller remote size pouch
The second zippered area is for a notebook computer and holds a separate padded case with shoulder strap for side trips
The third zippered area has an expandable briefcase style accordion portfolio, with possible room for a small digital projector, printer or camera
Total Case Interior Dims:12.5" H x 7.5" D x 14.5" L
Total Case Exterior Dims:14" H x 8" D x 16" L
Rear Interior Area Dims:11.5" H x 4" D x 14.5" L
Total Case External Dims with wheel assembly:17" H x 9.5" D x 16" L
| MSRP: |
$245.00 |
Our Price: |
$196.00 |
|
|
|
Front of case has a Velcro flap and large zippered expansion pouch plus smaller remote size pouch
The second zippered area is for a notebook computer and holds a separate padded case with shoulder strap for side trips
The third zippered area has an expandable briefcase style accordion portfolio, with possible room for a small digital projector, printer or camera
Total Case Interior Dims:12.5" H x 7.5" D x 16.5" L
Total Case Exterior Dims:14" H x 8" D x 18" L
Rear Interior Area Dims: 11.5" H x 4" D x 16.5" L
Total Case External Dims with wheel assembly:17" H x 9.5" D x 18" L
| MSRP: |
$256.00 |
Our Price: |
$205.00 |
|
|
|
Front of case has a Velcro flap and large zippered expansion pouch plus smaller remote size pouch
The second zippered area is for a notebook computer and holds a separate padded case with shoulder strap for side trips
The third zippered area has an expandable briefcase style accordion portfolio, with possible room for a small digital projector, printer or camera
Total Case Interior Dims:12.5" H x 7.5" D x 14.5" L
Total Case Exterior Dims:14" H x 8" D x 16" L
Rear Interior Area Dims: 11.5" H x 4" D x 14.5" L
Total Case External Dims with wheel assembly:17" H x 9.5" D x 16" L
| MSRP: |
$229.00 |
Our Price: |
$229.00 |
|
|
|
Designed as a rolling digital projector/notebook computer carry on case
It has semi-rigid, padded 1600 denier walls with six inline skate wheels (3per side) spaced 16.5" wide, a 41" extension handle, padded shoulder strap, #10 zippers, with a soft feel top carrying handle
Front of case has a Velcro flap and large zippered expansion pouch plus smaller remote size pouch
The second zippered area is for a notebook computer and holds a separate padded case with shoulder strap for side trips
The third zippered area has rigid padded walls and holds a digital projector with adjustable inserts
Total Case Interior Dims:12.5" H x 7.5" D x 16.5" L
Total Case Exterior Dims:14" H x 8" D x 18" L
Rear Interior Area Dims:11.5" H x 4" D x 16.5" L
Total Case External Dims: 17" H x 9.5" D x 18" L
| MSRP: |
$244.00 |
Our Price: |
$195.00 |
|
|
|
Front of case has a Velcro flap and large zippered expansion pouch plus smaller remote size pouch
The second zippered area is for a notebook computer and holds a separate padded case with shoulder strap for side trips
The third zippered area has rigid padded walls and holds a digital projector with adjustable inserts
Total Case Interior Dims:12.5" H x 7.5" D x 16.5" L
Total Case Exterior Dims:14" H x 8" D x 18" L
Rear Interior Area Dims: 11.5" H x 4" D x 16.5" L
Total Case External Dims with wheel assembly:17" H x 9.5" D x 18" L
| MSRP: |
$244.00 |
Our Price: |
$195.00 |
|
|
|
|
